Chicco Fit4 | Stage 1

Skip to Main Content
 

Install the Positioner

To ensure a better fit for smaller infants the Stage 1 Positioner may be needed. Do NOT use any other infant insert or pillows. Only use those provided by Chicco for this Child Restraint.

WARNING - ONLY use the Stage 1 Positioner if the child weighs between 4 and 16 lbs (1.8 and 7.3 kg).

WARNING - Stage 1 & 2 Headrest and Stage 2 Positioner MUST be in place when the Stage 1 Positioner is used.

  • 1.Pull both Harness Straps over the side panels of Stage 1 Positioner.
  • 2.Push Stage 1 Positioner firmly into Child Restraint to make sure it is properly positioned.
  • 3.Lift up on the Stage 1 Positioner and pull Crotch Strap Pad through slot.
  • 4.Thread the Harness Buckle up through the slot in the Stage 1 Positioner and Crotch Strap Pad. Make sure the fabric flairs are tucked under the slot of the Stage 1 Positioner.

Install the Headrest Insert

Do NOT use any other infant insert or pillows. Only use those provided by Chicco for this Child Restraint.

  • 1.Fold over the Stage 1 & 2 Headrest side sections and insert both headrest flaps into the Headrest pockets, as shown.
  • 2.Tuck the bottom section of the Stage 1 & 2 Headrest under the Harness straps.
  • 3.Attach the Stage 1 & 2 Headrest snap button straps to the back of the backrest fabric, repeat for the other side.

Return to all Stages