Artsana USA, Inc. (Chicco USA) has decided that certain MyFit Zip Air Harness Booster child seats fail to conform to Federal Motor Vehicle Safety Standard No. 213, “Child Restraint Systems”. In certain configurations the child seat may allow excessive chest movement in a crash, increasing the risk of injury in a crash. This recall does not affect aircraft installation.

Step 1:
Check your Model Number and Date of Manufacture

• MyFit Zip Air Q Collection (MODEL NO. 07079561970070)
• MyFit Zip Air Atmos (MODEL NO. 04079561190070)

Please locate your product’s model number and date of manufacture by looking at the label included on the bottom of your car seat as shown below:

Step 2:
Check Current Installation Method

Until you receive the remedy kit, you may continue using your car seat by ensuring that it is installed in either A or B modes listed below. You can reference the diagrams and questions below to determine if your installation method is safe to use while waiting for the recall remedy to be performed:

Installation A: Lap-Shoulder Belt with or without Top Tether

Installation A: Lower Anchors and Top Tether (LATCH)

Installation A: Lap-Only Belt with Top Tether

Installation B: Booster Seat

Installation C: Lap-Only Belt without Top Tether

Installation A
Is your MyFit Zip Air installed with top tether and/or Lap-Shoulder Belt? If yes – your installation method is safe to continue using.

Installation B
Is your MyFit Zip Air being used in BOOSTER Mode? If yes – your installation method is safe to continue using.

Installation C
Is your MyFit Zip Air installed with the lap belt only AND no top tether? If yes – your installation method is not safe to use until the recall remedy has been performed.

Step 3:
Register to Receive Remedy Kit

To receive the free remedy kit for the MyFit Zip Air please confirm your contact information by completing the form below on this page. Another notification will be sent to your address on file once the remedy kit is available.

The remedy kit will consist of (i) LATCH D-Rings with Webbing, (ii) Installation Instructions, and (iii) updated User Guide. The remedy will take around 10 minutes to complete.

If you have any questions regarding this recall, please contact Chicco USA by email: info.usa@artsana.com or call 1-877-424-4226, Monday through Friday from 8am to 5pm EST.

Supplemental Information

The below diagrams provide additional clarification on the differences between a Lap-Only Belt; Lap-Shoulder Belt; installation. The third diagram provides the most common locations for the Tether Anchor.

Lap-Only Belt

Lap-Shoulder Belt

Check your vehicle manual to confirm and/or locate your tether anchors.

Downloads

MyFit Zip Air Remedy Kit Request Form